| 杨安,赵丹,吴雅琴,胥春.聚酰亚胺共混改性增强义齿基托材料的力学性能研究[J].口腔材料器械杂志,2017,26(1):21-24. |
| 聚酰亚胺共混改性增强义齿基托材料的力学性能研究 |
| Effect of polyimide addition on the mechanical properties of PMMA-based denture materials |
| 投稿时间：2016-05-03 修订日期：2016-06-02 |
| DOI：10.11752/j.kqcl.2017.01.05 |
| 中文关键词: 聚酰亚胺 聚甲基丙烯酸甲酯 义齿基托树脂 力学性能 |
| 英文关键词:Polyimide PMMA Denture base Mechanical properties |
| 基金项目:上海交通大学“医工交叉基金”资助项目（YG2014MS10）；上海市青年科技启明星计划（10QA1404200） |
|
| 摘要点击次数: 1208 |
| 全文下载次数: 994 |
| 中文摘要: |
| 目的 研究聚酰亚胺共混改性聚甲基丙烯酸甲酯义齿基托树脂的力学性能。方法 对自行合成的聚酰亚胺（添加质量百分比分别为0，0.4%，0.6%，0.8%，1%）与PMMA义齿基托树脂共混得到的改性基托树脂进行三点弯曲强度试验、断面形态扫描电镜观察和冷热循环试验。结果 聚酰亚胺改性基托树脂抗弯强度在适当共混配比（0.6%）下可达（99.84±3.07）MPa，显著高于未改性树脂的抗弯强度（87.95±5.01）MPa，提高13.5%（P<0.05）。经过冷热循环后其增强效果依然显著（P<0.05）。结论 添加一定量的聚酰亚胺共混改性PMMA基托树脂能获得理想的增强效果。 |
| 英文摘要: |
| Objective In this study, a self-synthesized polyimide was blended into PMMA-based denture materials. The mechanical properties and cyto-compatibility of this composition were tested to understand whether polyimide is an effective additive to strengthen denture base materials. Methods Testing of the flexural properties and thermal cycling, scanning electron microscopy were used to characterize the composite denture material. Results Adding polyimide to 0.6% significantly increased flexural strength by 13.5% compared with the control group (P<0.05), and this reinforcement can also be observed after hydrothermal cycling. However, when polyimide content was further increased, flexural strength decreased due to particle aggregation. Conclusion Adding polyimide in proper proportion (0.6%) could be a feasible method to strengthen PMMA-based denture material. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |