| 赖光云,赵是民,汪俊.刷牙对大块和分层充填树脂的表面特性和颜色稳定性的影响[J].口腔材料器械杂志,2018,27(4):185-189,224. |
| 刷牙对大块和分层充填树脂的表面特性和颜色稳定性的影响 |
| Effects of toothbrushing on surface properties and color stability of incrementally-filled and bulk-filled composite resins |
| 投稿时间：2017-09-11 修订日期：2018-01-22 |
| DOI：10.11752/j.kqcl.2018.04.02 |
| 中文关键词: 复合树脂 光泽度 表面粗糙度 颜色 |
| 英文关键词:Composite Resin Gloss Surface roughness Color |
| 基金项目:国家重点研发计划（编号：2017YFC0840100，2017YFC0840110） |
|
| 摘要点击次数: 1077 |
| 全文下载次数: 827 |
| 中文摘要: |
| 目的 比较刷牙对大块和分层充填复合树脂的表面特性和颜色稳定性的影响。方法 选取基质成分相同的分层复合树脂Amaris和大块复合树脂X-tra fil，分别制备了8个试件，抛光后体外模拟刷牙1h，对比刷牙前、后两者的表面光泽度（GU）、表面粗糙度（Ra）以及颜色变化情况，并观察两者表面的显微形貌。结果 刷牙前、后Amaris的GU值均显著高于X-tra fil（P<0.001和P=0.018）。刷牙前Amaris的Ra值显著低于X-tra fil（P<0.001），但是刷牙后其Ra值却显著高于X-tra fil（P<0.001）。X-tra fil刷牙前后色差（Δ E）显著低于Amaris（P<0.001）。结论 大块树脂能较好的耐受机械刷牙的磨耗并具有更好的颜色稳定性。 |
| 英文摘要: |
| Objective To evaluate the effects of toothbrushing abrasion on the surface roughness and the color stability of incrementally-filled and bulk-filled composite resins.Methods Sixteen dimensionally standardized composite resins specimens (n=8/group) were made from one incrementally-filled composite resins (Amaris) and one bulk-filled composite resins (X-tra fil). Before and after toothbrushing simulation, the surface gloss was measured by a glossmeter, the surface roughness was evaluated by a profilometer, and the color was measured using a spectrophotometer.Results Before and after the toothbrushing abrasion, the gloss value in Amaris group was significantly higher than that in X-tra fil (P<0.001 and P=0.018). The surface roughness in Amaris was lower than that in X-tra fil group befor toothbrushing, while it was higher that in X-tra fil group after polishing (P<0.001). In addition, X-tra fil exhibited lower Δ E than Amaris after the simulated toothbrushing (P<0.001).Conclusions The bulk-filled composite resin showed better maintenance of surface smoothness and better color stability, compared to traditionally incrementally-filled composite resins. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |