徐蕴文,毕文雅,陈倩,李雯,傅远飞,祝丽青.强度梯度氧化锆水热老化后光学性能稳定性的研究[J].口腔材料器械杂志,2026,35(3):145-149.
强度梯度氧化锆水热老化后光学性能稳定性的研究
Study on the Stability of the Optical Properties of Strength-Gradient Zirconia After Hydrothermal Aging
投稿时间:2026-02-13  修订日期:2026-03-20
DOI:10.11752/j.kqcl.2026.03.03
中文关键词:  多层氧化锆  强度梯度  水热老化  半透性  色差
英文关键词:Multilayered zirconia  Strength-gradient  Hydrothermal aging  Translucency  Color difference
基金项目:
作者单位E-mail
徐蕴文 上海交通大学医学院附属第九人民医院口腔修复工艺科, 上海交通大学口腔医学院, 国家口腔医学中心, 国家口腔疾病临床医学研究中心, 上海市口腔医学重点实验室, 上海市口腔医学研究所, 上海 200011  
毕文雅 爱尔创合作研究中心, 辽宁爱尔创生物材料有限公司, 沈阳 110000  
陈倩 上海交通大学医学院附属第九人民医院口腔修复工艺科, 上海交通大学口腔医学院, 国家口腔医学中心, 国家口腔疾病临床医学研究中心, 上海市口腔医学重点实验室, 上海市口腔医学研究所, 上海 200011  
李雯 爱尔创合作研究中心, 辽宁爱尔创生物材料有限公司, 沈阳 110000  
傅远飞 上海交通大学医学院附属第九人民医院口腔修复工艺科, 上海交通大学口腔医学院, 国家口腔医学中心, 国家口腔疾病临床医学研究中心, 上海市口腔医学重点实验室, 上海市口腔医学研究所, 上海 200011  
祝丽青 上海交通大学医学院附属第九人民医院口腔修复工艺科, 上海交通大学口腔医学院, 国家口腔医学中心, 国家口腔疾病临床医学研究中心, 上海市口腔医学重点实验室, 上海市口腔医学研究所, 上海 200011 zhuliqing8504@163.com 
摘要点击次数: 27
全文下载次数: 0
中文摘要:
      目的 评估并对比两种多层强度梯度氧化锆在水热老化后的光学性能稳定性。方法 选取三层和五层强度梯度氧化锆A3色瓷块,从各梯度层制备15 mm×15 mm×1 mm试件(n=6/层)。使用分光光度仪测量其在黑白背景下的CIE L*、a*、b*值,计算初始半透性(TP)。将试件在134℃、0.2 MPa条件下进行5 h和10 h水热老化,再次测量颜色参数,计算老化后TP及色差(ΔE)。结果 随着老化时间延长,各组?E值普遍增大,但均低于临床可接受阈值。两种材料的半透性均下降。五层氧化锆在老化前后均展现出显著且稳定的层间TP值梯度。三层结构氧化锆在老化前各层间半透性均质性较好,无统计学差异(P>0.05),但在老化后于S1层与S3层之间出现的差异具有统计学意义(P<0.05)。结论 两种强度梯度氧化锆颜色稳定性优异,但半透性随老化过程呈下降趋势。
英文摘要:
      Objective To evaluate and compare the optical stability of two multilayered strength-gradient zirconia films after hydrothermal aging. Methods A3 shade zirconia blocks of three-layer and five-layer strengthgradient zirconia were selected. Specimens(15 mm×15 mm×1 mm, n=6 per layer) were sectioned from each gradient layer. A spectrophotometer was used to measure the CIE L*, a*, b* values of each specimen against standard white and black backgrounds, and initial translucency parameters(TP) were calculated. The specimens were then hydrothermally aged at 134℃ and 0.2 MPa for 5 h and 10 h. After aging, color parameters were remeasured to determine TP and color difference(ΔE). Results With the extension of aging time, the ΔE values of all groups generally increased, but all remained below the clinically acceptable threshold. The translucency of both materials decreased. The five-layer zirconia exhibited a significant and stable interlayer TP value gradient both before and after aging. The three-layer zirconia structure showed good interlayer translucency uniformity before aging, with no statistical differences(P>0.05), but after aging, a statistically significant difference appeared between the S1 and S3 layers(P<0.05). Conclusion Both types of strength-gradient zirconia demonstrated excellent color stability, although their translucency decreased after aging.
查看全文  查看/发表评论  下载PDF阅读器
关闭