| 刘好术,姚谊晶,杨志刚.牙科铸造钴铬合金氩弧焊接后的力学性能分析[J].口腔材料器械杂志,2018,27(1):29-31,45. |
| 牙科铸造钴铬合金氩弧焊接后的力学性能分析 |
| Analysis of mechanical properties of Co-Cr dental casting alloy after argon-arc welding |
| 投稿时间：2016-08-10 修订日期：2017-07-23 |
| DOI：10.11752/j.kqcl.2018.01.06 |
| 中文关键词: 铸造钴铬合金 氩弧焊接 力学性能 |
| 英文关键词:Cast Co-Cr alloy Argon-arc welding Mechanical properties |
| 基金项目: |
|
| 摘要点击次数: 1387 |
| 全文下载次数: 763 |
| 中文摘要: |
| 目的 研究牙科铸造用高熔钴铬合金氩弧焊接后的力学性能，为临床口腔修复的应用提供实验依据。方法 用直径2mm蜡线，常规包埋，牙科铸造钴铬合金铸造长约5cm的金属段20根，随机分成2组，每组10根。A组不做处理；B组从中间切断，用同材料做焊丝，氩弧焊接。然后分别测试其维氏硬度（HV10）、拉断力、屈服强度和延伸率等力学性能。结果 焊接后的牙科铸造钴铬合金的维氏硬度、拉断力、屈服强度和延伸率等，几乎与未焊合金相同，经χ2计算，P>0.05。结论 氩弧焊接牙科高熔铸造钴铬合金的力学性能良好，可考虑用于牙科铸造支架断裂焊接，在金属支架上增加人工牙、高熔铸件缺陷修补以及圆锥形套筒冠外冠与支架的焊接等方面。 |
| 英文摘要: |
| Objective To study the mechanical properties of dental casting Co-Cr alloy after argon-arc welding, and to provide a theoretical basis for clinical application. Methods After conventional invest by using 2 mm wax string, 20 metal segmentswith 5cm in length were produced using dental Co-Cr alloy. They were randomly divided into 2 groups with 10 pieces in each group. The samples in group B was cut in the middle, using the same material and argon-arc welding. Group A, the samples without any treatment was used asthe control group. Both groups were tested by Vickers-hardness(HV10), tensile force, yield strength and elongation. And the atomic structures of the welding zone were observed by the electron microscope. Results no statistically significant difference was observed in Vickers-hardness(HV10), tensile force, yield strength and elongation between two groups (P >0.05). Conclusions Dental casting Co-Cr alloy welded by argon-arc technique has good mechanical poperties. It can be used for welding fractured casting framework, conical telescopic crown and frame. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|